The design included removing the existing roof membrane system down to the concrete deck, removing any abandoned mechanical units and duct work, repairing all damaged/spalled concrete at deck, and providing new Built-Up membrane roofing system. At the elevations, noted areas of cracked, spalled and damaged masonry at each elevation were repaired. Any salvageable brick was saved and reused along with new brick to match the existing. Only existing or salvaged brick was reused at areas on the Walnut St Elevation. TBS also assisted in the long term protection of the new façade. The existing vertical masonry wall was properly cleaned and prepared to accept new fluid applied coating system. This coating is to act as the primary substrate behind the new glass and curtain wall system and light spire at the Walnut Street façade.